Buried & Blind Via's

 

Buried via's connect two or more layers within a multilayer without having direct connection to either the top or bottom surface layer. Buried via's are usally on thin core laminate inner layers allowing micro via hole size to be used. Finished hole sizes os 0.10mm can be accomplished.

Blind via's connect either the top or bottom surface layers to the inner layers but do not penetrate the entire printed circuit board. The copper surface z-axis feature on our Schmoll drill machine allows close tolerance z-axis controls. Due to the advanced plating process specialist drills are used with diameters of 0.12mm and 0.40mm. The maximum drill depth has to be controlled to allow the correct plating perameters. This is a 1 to 1 ratio of drill width to hole depth. If a deeper depth is required blind via's can be stacked.

Blind via Blind via's